Alpha Novus FXM 1100 Operator's Manual download pdf (Page 45)

Wiring the RS-232 port

The FXM’s front panel has a DB-9 female connector. When connect-

ed to a PC with Windows HyperTerminal or other terminal emulation

software, the FXM can be remotely monitored and controlled with it’s

command-line system. The Novus User Software provides a Win-

dows or web browser type of control.

Procedure

Connect a 9-pin, fully shielded, straight-through DE-9 to DE-9 1.

connector cable between the computer’s port and the FXM’s

port.

Figure 7. 6 – RS-232 pin connections

Conﬁgure the communications parameters to the values shown 2.

in the terminal set up table below.

Terminal Set Up Table

Emulation Type VT 100 or

Compatible

Backspace N/A

Duplex Mode Half Duplex Break Length N/A

Xon/Xoff Flow

Control

None Emulation Type N/A

RTS/CTS Flow

Control

Off

Communication Parameters

Line Wrap On Handshaking Software

Handshaking

Screen Scroll On Baud Rate 2400 bps

CR Translation CR Data Format 8 Data, No Parity, 1

Stop Bit

Figure 7.7 – Terminal Set Up Table

Operation

Doc# 017-201-B0 Rev 0408

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 97 98

No comments

Alpha Novus FXM 1100 Operator's Manual Page 45