Alpha XM 6015 Series Operations Instructions download pdf (Page 29)

INSTALLATION

To ensure operator safety:

1. Power supplies should be installed only by qualified personnel and in accordance

with applicable electrical codes.

2. Use eye protection whenever working with batteries.

3. Use only sealed, lead-acid type batteries (gelled-electrolyte or equiv., 55 Ah min.)

4. Use a bucket truck, or suitable climbing equipment such as a safety harness and

climbing spikes, whenever installing or servicing pole-mount installations.

6.1 Unpacking and Inspection

Carefully remove the power module and enclosure from their shipping containers.

Make sure that the following items have been included:

1. XM Series Power Module (including BCK-X battery cable kit).

2. PME Pole-mount enclosure (with two, galvanized mounting brackets, SPI service

power inserter, 15 Amp "HM" circuit breaker assembly with duplex receptacle).

PWE, UPE and UPE/M are optional enclosures. Note: Batteries are shipped

separately.

3. Operator's Manual.

4. Any other ordered options.

Inspect the contents. If items are damaged or missing, contact Alpha Technologies

and the shipping company immediately. Most shipping companies have only a short claim

period.

SAVE THE ORIGINAL SHIPPING CONTAINER.

In the event a unit needs to be returned for service, it should be packaged in its

original shipping container. If the original container is not available, make sure the unit is

packed with at least three inches of shock-absorbing material to prevent shipping damage.

Note: Do not use popcorn-type material. Alpha Technologies is not responsible for

damage caused by improper packaging on returned units.

READ THE OPERATOR'S MANUAL.

Become familiar with the power supply's front and side panel. Review the drawings

and illustrations contained in the manual before proceeding. If you have questions regard-

ing the safe installation or operation of this unit, contact Alpha Technologies or your

nearest Alpha representative.

6. INSTALLATION

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 60 61

No comments

Alpha XM 6015 Series Operations Instructions Page 29