Alpha 1000A Specifications download pdf (Page 88)

5-8 • Installing and Removing Components AlphaServer 1000A Owner's Guide

Figure 5-5 Removing a Memory Module

MA00233

Installing Memory Modules

You need to install a new memory module to replace a faulty module or when

upgrading a memory bank. You may need to remove memory modules in order to

access the memory slots for any new modules (see the earlier section, "Removing

Memory Modules"). To install a memory module, refer to Figure 5-6 and follow

these steps:

1. Tilt the connecting end of the module and press gently on the module so it slips

over the two posts located at each end of the slot (see Figure 5-5).

2. Reinstall any memory modules you may have removed for access purposes.

3. Replace the system covers following the procedures listed in "Replacing the

System Unit Covers."

4. Test the memory configuration using the following commands:

>>> show memory

>>> memory

For more information, see the section, "Configuring Memory" in Chapter 6,

"Configuring."

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 217 218

No comments

Alpha 1000A Specifications Page 88