Alpha 1000A Specifications download pdf (Page 61)

AlphaServer 1000A Owner's Guide Basic Operation • 4-15

1. Check that the Halt switch is off.

2. Enter the login command.

3. When the Enter Password: prompt is displayed, press the Halt switch, then

press Return.

4. Press the Halt switch off. The password is now cleared, and secure mode cannot

be reinstated until you set a new password.

Note: If you leave the Halt switch on after

you clear the password, the system will not

boot.

The clear password Command

The clear password command clears the environment variable, password,

setting it to zero. Use this command when you want access to all the SRM console

commands, but the system is in secure mode. To use clear password, you

must know the current password. If you do not know the password, see "The login

Command."

>>> clear password

Please enter the password:

Password successfully cleared

Getting Help on the Windows NT (ARC) Console

The Windows NT (ARC) console provides general help on using the Setup menu,

although it does not provide help on all the menu items contained in its menus. Table

4-2 lists the steps that you follow to display the Setup menu help screen.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 217 218

No comments

Alpha 1000A Specifications Page 61