Alpha 1000A Instruction Manual download pdf (Page 22)

Using the SRM Console

2-4 AlphaServer 1000/1000A Supplement

AlphaServer 1000 Systems

The AlphaServer 1000 show config command display (Example 2-2)

includes these elements:

Firmware:

Version numbers for the firmware code, PALcode, SROM chip, and

CPU are displayed.

Memory:

The memory size and configuration for each bank of memory is

displayed.

Hose 0, Bus 0, PCI:

All controllers on Hose 0, Bus 0 of the primary PCI bus are

displayed. For storage controllers, the associated devices are also displayed.

Slot 6 is assigned to the PCI-to-EISA bridge chip

Slot 7 is assigned to the PCI-to-PCI bridge chip

Slots 11-13 correspond to physical PCI option slots on the primary PCI bus:

Slot 11 = PCI 11

Slot 12 = PCI 12

Slot 13 = PCI 13

Note:

If the system finds PCI devices it does not recognize, the

device and vendor ID will appear as 0000 1011 in the

show config

display. This does not mean that the device is not supported, only

that it is not in the SRM table of known devices.

Hose 0, Bus 1, EISA:

All controllers on Hose 0, Bus 1 of the EISA bus are

displayed. The logical slot numbers in the left column of the display correspond

to physical EISA option slots 1-8. For storage controllers, the associated

devices are also displayed.

Slot 1 = EISA 1

Slot 2 = EISA 2

Slot 3 = EISA 3

Slot 4 = EISA 4

Slot 5 = EISA 5

Slot 6 = EISA 6

Slot 7 = EISA 7

Slot 8 = EISA 8

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 66 67

No comments

Alpha 1000A Instruction Manual Page 22