Alpha AWS-125 Instruction Manual download pdf (Page 13)

INSTALLATION OF WATER ATTACHMENT

1. Remove the wing screw and washer for

adjusting the cutting depth.

(See Figure-6)

2. Raise cutting depth so there is room

between the body and the base plate.

(See Figure-6)

3. Insert the plastic nozzle on the water-feed assembly behind the height adjustment

slide. Make sure that the water valve bracket (Part No. 133094) is in front of the slide.

If your blade is already installed, the plastic nozzles should be positioned so that each

nozzle directs water spray onto each side of the blade. (See Figure-7 & Figure-8)

4. Align the water valve bracket with

the wing nut hole and insert wing

bolt.

(See Figure-9)

5. Adjust the height of the blade and securely tighten the wing bolt.

Figure-7 Figure-8

Figure-6

Figure-9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

Alpha AWS-125 Instruction Manual Page 13